Jewlery Photography Part 2
In my last article, I went on the difficulties of photographing jewelry and the way difficult it is to get a consistent look and feel. The thing that made the most significant difference initially was the use of a specific lighting tent. This tent measured about 17″ x 17″ x 17″ and was foldable, so very very portable from destination to place. They have LED lighting stitched in and four different color backdrops. But this wasn’t the one thing I needed. Although it provided me with a company foundation to photograph, there were other activities I necessary to do. So with Amazon, I went straight back to my client’s jewelry store to set up again. As above mentioned, the tent made a significant difference and provided a basis to be effective from, but there have been other variables I came across made a huge impact as well.
Here’s a run down of the things I have done to acquire consistent images whenever. Firstly, I set my camera to manual mode. In this way I could specifically ensure nothing would change shoot to shoot. My white balance was adjusted accordingly, and I created a note of my settings for future use, including just how far back my camera was from your tent etc. I actually took a picture using my iPhone to record this create for future use. Secondly, I used a macro tube extension set. This piece of equipment enabled me to acquire really near each piece to be able to capture the maximum amount of detail as you can. The beauty of utilizing an extension set is I could put it on my zoom lens and possess the camera further back thus i could access the tent easier minus the camera being in how. Now because of the extension set, I discovered another problem. My depth of field was dramatically affected and I had the problem of just one area of the piece being sharp, with the rest from focus. I seriously had to fiddle with all the settings to reduce this as best I could, so a higher f stop number was adopted, as well as this resulted in the shutter being open for extended.
The tripod was essential. As had been a remote shutter release control that we purchased. This led to far better stability and eliminated the camera shake. The final thing I ensured was which i photographed in RAW format to ensure that I needed the highest quality image to use. I was set and also the results of my images were a great deal better. They 86dexmpky the product quality the thing is in top professional shoots of course, but they were certainly adequate for any small jewelry store around town. It was one of the toughest projects I actually have carried out in my photographic life. I needed to alter so lots of things to receive the desired results, and my use of Lightroom afterwards played a huge role in developing the photos. Because my set up became consistent, my development settings also were consistent and enabled me to use a similar setting to each and every photograph. This is certainly consistency at its finest.